RMA, retur och garanti
RMA-applikation
Varan är defekt
För att ytterligare förbättra retur- och ersättningseffektiviteten behöver kunderna bara köra Seagates testprogram online och skicka skärmdumpen av FAIL-felrapporten (måste inkludera sn-numret) till vår e-post sales@hddprice.dk sales@hddprice.se, Inget behov att testa av oss och vänta länge, om du vägrar att skicka ett felmeddelande har vi rätt att vägra att behandla din begäran eftersom vi behöver byta ut den nya hårddisken med felkoden
Kontakta oss innan du skickar en defekt Seagate-testkod och SN-nummer så att vi kan auktorisera returen och utfärda ett RMA-nummer (Return Material Authorization).
Innan du returnerar produkten, prova Seagates diagnostiska skanningstest för att bekräfta orsaken till felet
https://www.seagate.com/gb/en/support/downloads/seatools/
Hur får man en garanti?
Varan är defekt
Vår OEM-versionsgaranti av hårddisken är enligt produktbeskrivningen, vanligtvis 3 år eller 5 år, om Seagate-testet har en felkod skickar vi direkt en helt ny hårddisk, samma modell, så innan du kan få garanti måste du gå igenom Seagate- hårddisktestet, och skicka skärmdumpen av rapporten (som kan visa produktens SN) till vår e-post sales@hddprice.dk sales@hddprice.se
Kontakta oss innan du skickar en defekt Seagate-testkod och SN-nummer så att vi kan auktorisera returen och utfärda ett RMA-nummer (Return Material Authorization).
Du måste se till att hårddisken inte är skadad och att det inte finns några skador på utseendet. Om vi får din RMA för att verifiera att hårddisken verkar bucklig, repad eller skadad, vägrar vi att ansvara för utbyte, garanti och retur
Innan du returnerar produkten, prova Seagates diagnostiska skanningstest för att bekräfta orsaken till felet
https://www.seagate.com/gb/en/support/downloads/seatools/
Efter att ha stött på ett problem kan vi lösa hårddiskproblemet mer effektivt i framtiden. Vi måste först tillåta Seagates hårddisktestverktyg att känna igen hårddiskens felkod
1. Why use SeaTools?
A test of all drives returned to Seagate for replacement under warranty found the majority to be in good condition with no issues found
(NPF). Returning a hard drive for warranty service means that your system will be out of service, and packing and returning the hard drive product will bring you
inconvenient. It is in your interest to find out if the drive really needs to be replaced before sending it out. This hard drive diagnostic utility will help you
This confirmation, it will not only save you time and money, but also protect your data.
Some common reasons for problems not found are:
* File system corruption
* Driver corruption
* MBR corruption
* Virus and Trojan attack
* Spyware, adware and keyloggers
* hardware conflict
Seagate SeaTools software is easy to use. The following instructions will help you get the most out of this new software tool.
2. Using SeaTools for Windows
A. Prepare the system
All other applications should be closed before running drive diagnostics. The main reason for doing this is to let the hard disk focus as much as possible
SeaTools. Otherwise, Windows
Commands will continue to be issued to the drive to satisfy data access needs of other applications. In this case, SeaTools
Will temporarily suspend the current progress when the hard disk is busy. This is harmless to the hard drive and is a normal use case; however it will delay the
Completion time of SeaTools inspection
Via USB, 1394 Firewire or eSATA
An external hard drive connected to the system has different background activity than an internal hard drive. The logo of the built-in hard disk is SATA (Serial ATA), PATA (Parallel
ATA or IDE), SAS (Serial Attached SCSI), or SCSI. Most desktop and notebook computer systems have a SATA or PATA
Built-in hard disk.
If the detection time is too long, it may be necessary to suspend power management control first. A full hard drive scan can take hours to complete. The hard disk is now alone
Since it is running, the system may think that the hard disk should go into "standby" or "hibernation" mode. Windows XP and Vista
There is a "Turn off Hard Disk" setting in the "Power Options" of the Control Panel, which should be set to "Never" during the detection process.
For notebook systems, long tests should not be done on battery power only. These tests are hard disk intensive and they will be compared to a
Consumes more power under normal use. During testing, be sure to connect the AC adapter to ensure adequate power.
To change the language, click the Help drop-down menu and select your desired language.
Select the hard drive to be detected
SeaTools
Once loaded, the various storage devices on your system will be listed on the screen. Check the box next to Drive Information to select the hard drive to be detected. this screen
The screen also displays information about the drive, such as model number, serial number. Seagate internal hard drive model numbers begin with the letters "ST". Maxtor
The product model number starts with "MAXTOR". An external hard drive may display a descriptive name such as "FreeAgent" or "OneTouch" in the Model column. Se
The agate serial number is alphanumeric and has a total of 8 characters. Seagate and Maxtor model drives are identified by a gold drive icon. No
Seagate drives are identified by a silver drive icon. A blue serial number indicates a boot device.
You can select multiple hard disks for detection at one time. Multiple hard disks can be tested simultaneously. You can also launch tests for other tests while they are running
Hard disk detection.
Make sure to select the correct hard drive!
Choose which tests to run
Displays a menu of diagnostic tests that can be performed. In addition to the "long detection class" provides repair USB
Except for the option of external hard disk sectors, all other basic tests are read-only tests that will not affect data security. Select the detection to perform. detection will
start immediately. Sector Repair can also be performed on Seagate-supported SATA drives using Fast Full Repair and Long Full Repair.
See the SATA Repair Properties screen below.
These tests include:
Full fixes "Quick" and "Long" require confirmation to start
SMART checks
Short drive self-test takes 20 to 90 seconds
Drive information can be saved to a log file
Short detection class A three-part detection
Long detection class progress in 1% increments, including USB external hard drive sector repair option
If the required level of support is missing, the software will report "detection not available". For example, "Short Drive Self Test" will not
run on the storage device.
When performing "Quick Full Repair" and "Long Time Full Repair", you need to press the F8 key, which means you confirm that SeaTools for Windows
It should attempt to fix any unreadable LBA (sector) issues it may detect.
Please note that when a sector is found to be bad and cannot be read, all data on it has been lost. See Section 4, "Help Topics:
Find Bad Sectors" for more information on this topic.
When the Short Drive Self Test (DST) is initiated, most drives will run a comprehensive diagnostic routine built into the drive's firmware. DST
No data corruption at all.
In most cases, the Short Drive Self-Test will suffice. If more comprehensive testing is required, consider running the "Long Test Class" or "Long Test Class"
DST detection", they read every sector of the hard disk.
Long tests will take longer to complete. Since the long test will read each sector of the hard disk, the time required depends on the speed of the hard disk.
degree and capacity. The largest hard drives typically require 2 to 4
hours to complete. You can abort the detection at any time, so that the hard disk will not be damaged, but if the detection is aborted, the hard disk cannot be fully detected.
"Long detection class" runs on internal and external hard drives. It can scan the entire hard drive from beginning to end. This test may take several hours to complete.
You can abort this test at any time. If a bad sector is found on the internal hard drive, the test fails and stops.
For USB external hard drives, the "Long Detection Class" provides a "Repair" sector option. For more information on this matter, see Section 4
Topics under the section "Finding Bad Sectors". If you choose "Repair" > "None", "Long Detection Class" will scan the entire hard disk and list all unreadable sectors
into the log file.
Data is stored in sectors, each sector is 512 bytes in size. enable usb
The "long detection class" of the sector repair function can only repair individual sectors as needed. Once a certain 512
If a sector of bytes cannot be read, any data that may have previously existed in that sector is lost. If the free space of the hard disk is large, it cannot read
The sectors of are most likely blank and unused sectors. If you choose Repair > All, after pressing F8
After pressing the key, the "Long Detection Class" detection will scan the entire hard disk, trying to repair all unreadable sectors. If a sector cannot be repaired, the test fails
and end. See the log file for a complete list of sectors that could not be read.
Summary of Results and Viewing Log Files
After the diagnostic tests run, each hard drive tested will have a log file stored in the Program
Files/Seagate/SeaTools for Windows
folder. To view these logs, note the drive serial number, then select the Help drop-down menu, from which select View Log Files.
The following test results are possible: - Pass - Fail - Abort
Efter att ha stött på ett problem kan vi lösa hårddiskproblemet mer effektivt i framtiden. Vi måste först tillåta Seagates hårddisktestverktyg att känna igen hårddiskens felkod
Om varan har ett fel som säljaren ansvarar för har du som konsument rätt att:
få produkten reparerad (åtgärd)
få produkten utbytt mot en ny (ersättningsleverans)
få en proportionell rabatt på priset
häva köpet om felet inte är obetydligt
Vem ansvarar för returkostnaderna?
Om ett fel uppstår och felet bekräftas genom testning
Upp till 150 DKK 230 SEK kan återbetalas, vi rekommenderar Dansk Post Economy Package
Om felet i varan visar sig omfattas av köplagens avvikelsesregler, är säljaren ansvarig för att exempelvis få varan reparerad eller ersatt med en ny, eller – om felet är väsentligt – för att få tillbaka dina pengar.
Du är skyldig att tillhandahålla produktens SN, och det måste vara i enlighet med order SN
Du ansvarar för att produkten inte skadas
Du ansvarar för varan tills den returneras till säljaren.